Master Equipment TP8298 11 Repl Brush Blue Force Hi Velocity Dryers

Master Equipment TP8298 11 Repl Brush Blue Force Hi Velocity Dryers

BY MASTER EQUIPMENT

Description

Pet dryer replacement parts from PetEdge save you time and money. These Master Equipment Blue Force Replacement Dryer Carbon Brushes are designed to fit both the 1.8 HP and 4.0 HP Master Equipment Blue Force Dryers. We recommend replacing all carbon brushes at the same time. Carbon brushes are an integral part of maintenance and should be replaced when worn to half their original length. Brushes are sold in pairs The 1.8 model has two brushes The 4.0 model has four brushes TP8290 18 1.8 HP dryers require one set of replacement brushes. TP8290 40 4.0 HP dryer require two sets of replacement brushes, one for each motor. Carbon Brush Replacement Instructions: These Carbon Brushes have been retrofitted to fit any Blue Force Hi-Velocity Dryer with modifications, regardless of date of manufacture. When you receive them, they will have a small piece of flat rubber sheeting wrapped around the end with a plastic zip tie. The production date of the dryer can be found on the Motor Rating Label, in the lower left corner. The first two numbers are the year, follow by Q with a number 1-4 after it. example: 11Q4 - The dryer was made in the fourth quarter of 2011. For dryers made before September 2009, remove the zip tie and rubber. For dryers made during and after September 2009, use with zip tie and rubber in place. Tools Needed: Phillips head screwdriver; Needle nose pliers Make sure dryer is unplugged and remove the hose. Remove single screw holding endcap in place. To remove endcap, rotate black endcap counterclockwise. Remove the two small screws holding the brush bracket then remove the bracket. Set aside to reuse, along with the retaining screws Unplug the connecting wire on the bottom of the carbon brush. (The pliers may be used here if necessary.) There is a rubber sleeve that must be removed the first time the carbon brushes are changed. This sleeve is not necessary; it may be disposed of. Remove the used carbon brush and replace with the new one. Make sure that the new brush is fully seated in place. The black plastic "wings" on each side should be all the way down to the motor frame. You will also have to compress the carbon block back into the black retainer to make the new brush fit. Replace the bracket and screws. Plug connecting wire back onto carbon brush, making sure that it is all the way on. Repeat instructions for second brush. see more...

Top Questions No one has asked a question yet! Be the first!

Master Equipment TP8298 11 Repl Brush Blue Force Hi Velocity Dryers
Master Equipment TP8298 11 Repl Brush Blue Force Hi Velocity Dryers
Reviews (0)
Q&A (0)
Leave a Review
REVIEWS
Be the first to review this item!

Start your review of Master Equipment TP8298 11 Repl Brush Blue Force Hi Velocity Dryers!

How would you rate this product?
Did you forget to choose a rating for your review?
Q & A

Looking for
your answer?

Be the First to Ask a Question

Sign up to join our community!

Influenster Cashback
We recorded your visit.
Master Equipment TP8298 11 Repl Brush Blue Force Hi Velocity Dryers

was opened in another window. If you made a purchase CashBack will be automatically added to your Ebates account tomorrow.

Please confirm your email.
If you have an existing Ebates account, make sure to enter your Ebates email

6 characters minimum. Password must consist of letters, at least 1 number and 1 special character.