Woah there, it looks like your browser is out of date.

To get the best experience, please update your browser.

Aqua Mix Grout Sealer - Pint

Aqua Mix Grout Sealer - Pint


Product Description

Grout Sealer MSDS AQUA MIX GROUT SEALER is a water-based sealer that resists water, oil, and acid-based contaminants. Simplifies maintenance and does not change the appearance of the grout. Allows moisture vapor transmission. Aqua Mix No VOC (Volatile Organic Compound Formulas) help provide better indoor and outdoor air quality compared to similar traditional products. USES: Cementitious sanded and unsanded porous grout joints for ceramic tile installations. Effective for interior and exterior applications. EXPECTED WEAR UP TO 5 YEARS: Will vary depending on hardness and texture of surface, type of area, surface wear, frequency, and type of maintenance products used. Weather conditions, harsh cleaning methods, and high-alkaline, acidic, or solvent-based cleaners will affect wear. APPLICATION: 1) Read entire label before using. 2) For new installations, sealer can be applied as soon as 48 hours after grouting. 3) Grout joints must be clean, dry, and free of existing sealers or coatings. 4) Apply using a soft-bristle paintbrush or sponge paint applicator. NOTE: Be sure any sealer that does not penetrate surface is removed from surface within 5 minutes of each application using absorbent paper or cotton towels. 5) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats. 6) After 2 hours conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test. 7) Ready for surface traffic in 2 hours after final coat. Keep area dry for 12 hours. Achieves a full cure in 24 hours. 8) Clean applicator tools with water after each use. 9) May be reapplied as needed to grout joints that are clean. MAINTENANCE: Concentrated Stone & Tile Cleaner, or AquaKleenTM is recommended for routine spray and wipe cleaning. NOTES: Do not allow sealer to dry on tile surface because a residue will be visible. If this occurs, use Aqua Mix Poultice Stain see more...

Top Questions No one has asked a question yet! Be the first!

Aqua Mix Grout Sealer - Pint
Aqua Mix Grout Sealer - Pint
Reviews (0)
Q&A (0)
Leave a Review

Join now to gain access to over 25 million product reviews, free full size samples, and the latest product news.

Get Started

Are you a Brand or Agency? Contact Us