Abundant Flow Water Mechanical pH Calcite 20 System Fleck 5600

Abundant Flow Water Mechanical pH Calcite 20 System Fleck 5600

BY ABUNDANT FLOW WATER

Description

High-flow Calcite pH system with Fleck 5600 for acid neutralization Product Features Complete System 12"x48" resin tank Riser tube with distributor basket Fleck 5600 Control Head 2 ft Calcite Media Gravel Bed Choice of connection High-Flow System Designed for 2-4 bathrooms and 3-5 people and/or homes with flows matching system capacities Neutralizes Acid Corrects low pH, causing the water to be close to neutral Blended at no charge For pH less than 6.0, blended with Corosex to provide the best results, at no additional charge 4.7 GPM Service Flow Treats a maximum flow rate of 4.7 gallons per minute - See more info tab for details 6.3 GPM Backwash Flow Requires a minimum of 6.3 GPM available for backwashing - See more info tab for details Fleck 5600 Mechanical Control Head Simple, low cost head provides automatic backwashing Structural USA Resin Tank Durable, high quality polyglass tank made by a trusted name it tank manufacturing Dome Loading Port Convenient dome loading port allows for easy replenishment of media without removing the control head Calcite Media Naturally occuring calcium carbonate treats acid naturally Corosex Media (Blended systems only) Aggressive manganese oxide treats lower pH levels, providing maximum results for supplies with pH less than 6.0 DIY Installation Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours. Detailed Installation Instructions 5-Year Control Head Warranty 10-Year Tank Warranty Product Description Acid neutralization is a must to prevent leaks, maintain fixtures, and ensure good health. Acidic water (water with a pH less than 7.0) can eat away at your plumbing and cause blue/green staining on your fixtures. Some also believe that water with a low pH can have adverse health effects The pH system uses Calcite to neutralize the acid by dissolving and counteracting the acidity. In homes with pH less than 6.0, a blend of Calcite and Corosex is used, complimenting each other. The Corosex is more aggresive, providing the ability to raise very low pH levels, while the Calcite is slow acting, counterbalancing the Corosex and preventing excessive pH rise. Note: Due to the nature of pH systems some hardness is added to the water. Depending on exisiting hardness levels and pH level, an water softener after the pH system may be recommended The high quality tank also boasts a dome loading port for easy media replenishment. Since the media dissovles to neutralzie the acid, regular replenishment is necessary, usually about once a year depending on water use, pH levels, and system size. With the dome loading port you avoid the need to disconnect and remove the control head, simply unscrew the port and add media! Controlled by the Fleck 5600 control head, this system automatically backwashes. The backwash process simply forces water rapidly through the system in reverse direction, lifting the media and flushing accumulated particulates down the drain. It also prevents the media from solidifying and reducing efficiency. Made by Fleck, the #1 manufacturer of control heads in the US, the mechanical control head is one of the most popular heads on the market. More Info Fleck 5600 Specifications Fleck 5600 Service Manual Installation Instructions Replacement Media: FM-CLCT-05 - Qty Needed:3 (2 on blended systems) FM-CRSX-05 - Qty Needed:1 (blended systems ONLY) FM-GRVL-LB - Qty Needed:20 Service Flows Service flow rate is the rate (in gallons per minute) at which the media can effectively treat your water. The listed number is the manufacturers recommend rate for maximum neutralization. Higher flow rates MAY be possible in situations where slightly acidic water is desired/acceptable or where incoming water is not very acidic to begin with. Backwash Flow Rates The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and peak system performance. While lower flows can be used and MAY provide adequate results, using less than the recommended flows WILL void the 30-day satisfaction guarantee. Warranties on the tank and control valve will remain unaffected. see more...

Top Questions No one has asked a question yet! Be the first!

Abundant Flow Water Mechanical pH Calcite 20 System Fleck 5600
Abundant Flow Water Mechanical pH Calcite 20 System Fleck 5600
Reviews (0)
Q&A (0)
Leave a Review
REVIEWS
Be the first to review this item!

Start your review of Abundant Flow Water Mechanical pH Calcite 20 System Fleck 5600!

How would you rate this product?
Did you forget to choose a rating for your review?
Q & A

Looking for
your answer?

Be the First to Ask a Question

Sign up to join our community!

Influenster Cashback
We recorded your visit.
Abundant Flow Water Mechanical pH Calcite 20 System Fleck 5600

was opened in another window. If you made a purchase Cash Back will be automatically added to your Ebates account tomorrow.

Please confirm your email.
If you have an existing Ebates account, make sure to enter your Ebates email

6 characters minimum. Password must consist of letters, at least 1 number and 1 special character.